Deep-water sediment transport patterns and basin floor topography in early rift basins: Plio-Pleistocene syn-rift of the Corinth Rift,Greece

Our current understanding on sedimentary deep-water environments is mainly built of information obtained from tectonic settings such as passive margins and foreland basins. More observations from extensional settings are particularly needed in order to better constrain the role of active tectonics in controlling sediment pathways, depositional style and stratigraphic stacking patterns. This study focuses on the evolution of a Plio-Pleistocene deep-water sedimentary system (Rethi-Dendro Formation) and its relation to structural activity in the Amphithea fault block in the Corinth Rift, Greece. The Corinth Rift is an active extensional basin in the early stages of rift evolution, providing perfect opportunities for the study of early deep-water syn-rift deposits that are usually eroded from the rift shoulders due to erosion in mature basins like the Red Sea, North Sea and the Atlantic rifted margin. The depocentre is located at the exit of a structurally controlled sediment fairway, approximately 15 km from its main sediment source and 12 km basinwards from the basin margin coastline. Fieldwork, augmented by digital outcrop techniques (LiDAR and photogrammetry) and clast-count compositional analysis allowed identification of 16 stratigraphic units that are grouped into six types of depositional elements: A—mudstone-dominated sheets, B—conglomerate-dominated lobes, C—conglomerate channel belts and sandstone sheets, D—sandstone channel belts, E—sandstone-dominated broad shallow lobes, F—sandstone-dominated sheets with broad shallow channels. The formation represents an axial system sourced by a hinterland-fed Mavro delta, with minor contributions from a transverse system of conglomerate-dominated lobes sourced from intrabasinal highs. The results of clast compositional analysis enable precise attribution for the different sediment sources to the deep-water system and their link to other stratigraphic units in the area. Structures in the Amphithea fault block played a major role in controlling the location and orientation of sedimentary systems by modifying basin-floor gradients due to a combination of hangingwall tilt, displacement of faults internal to the depocentre and folding on top of blind growing faults. Fault activity also promoted large-scale subaqueous landslides and eventual uplift of the whole fault block.     

Crystal nucleation and growth produced by continuous decompression of Pinatubo magma

High-temperature decompression experiments demonstrate that crystal textures preserve a record of the style and rate of magmatic ascent. To reinforce this link, we performed a suite of isothermal decompression experiments using starting material from the climactic 1991 Pinatubo eruption. We decompressed experiments from 220 MPa to final, quench pressures of 75 or 30 MPa using continuous decompression rates of 100, 30, 10, 3, 1, and 0.3 MPa h^?1. Amphibole, clinopyroxene, and plagioclase crystallized during the experiments, with plagioclase microlites dominating the assemblage. Total microlite number densities range from 10^7.6±0.4 up to 10^8.2±0.2 cm^?3, with plagioclase accounting for up to 65% of the total number. Plagioclase microlite area increased systematically from 19?±?8 to 937?±?487 µm² with increasing experiment duration. Our textures provide time-integrated records of crystal kinetics. Average nucleation and areal growth rates of plagioclase are highest in the fastest decompressions (~?10^7.5 cm^?3 h^?1 and 10.1?±?4.1 µm² h^?1, respectively) and more than an order of magnitude lower in the slowest experiments (~?10^5.5 cm^?3 h^?1 and 0.8?±?0.2 µm² h^?1, respectively). Both nucleation and growth rates are highest at high degrees of disequilibrium. We find that peak supersaturation-dependent instantaneous rates are generally more than an order of magnitude faster than average rates. We use those instantaneous nucleation and growth rates to introduce an iterative model to evaluate the effects of different decompression rates, decompression paths (continuous, single-step or multistep), and the presence of phenocrysts on final crystallinity and microlite size distribution.     

Reconstructing Holocene palaeoclimate and palaeoceanography in Ìsafjarðardjúp,northwest Iceland,from two fjord records overprinted by relative sea‐level and local hydrographic changes

We reconstruct palaeoclimate and palaeoceanography of the Ísafjarðardjúp fjord system from two cores – one from the inner fjord and one near the fjord mouth – while separating the potential overprinting of relative sea‐level (RSL) and local fjord hydrographic changes on these records. The inner fjord core (B997‐339) reflects local fjord hydrography; the outer fjord core (MD99‐2266) reflects the regional oceanic signal. Glacial marine conditions ended at ca. 10 200 cal. a BP, indicated by both ice‐rafted debris records. The other proxy records show spatial and temporal variability within the fjord system. At the inner fjord site (B997‐339) foraminiferal assemblages and the δ¹⁸O record indicate lowered RSL between ca. 10 600 and 8900 cal. a BP and document the onset of fjord water overturning at ca. 8900 cal. a BP, which obscured the climate record. At the fjord mouth (MD99‐2266) mass accumulation rates suggest lowered RSL between ca. 10 200 and 5500 cal. a BP and local freshwater and/or reduced salinities of the Irminger Current water masses affected the δ¹⁸O signal between ca. 10 200 and 7900 cal. a BP. At MD99‐2266, foraminiferal fauna record the Holocene Thermal Maximum between ca. 8000 and 5700 cal. a BP and the onset of modern oceanic circulation at ca. 7000 cal. a BP. Copyright © 2010 John Wiley & Sons, Ltd.     

Do paleoclimate proxies agree? A test comparing 19 late Holocene climate and sea‐ice reconstructions from Icelandic marine and lake sediments

Geochemical, mineralogical and biological indicators preserved in sediments are widely used to reconstruct past climate change, but proxies differ in the degree to which their utility as climate indicators has been validated via laboratory experiments, modern spatial calibrations, or down‐core comparisons with instrumental climate data. Multi‐proxy studies provide another means of evaluating interpretations of proxies. This paper presents a multi‐proxy assessment comparing 19 sub‐centennially resolved late Holocene proxy records, covering the period 300–1900 AD, from seven Icelandic marine and lacustrine core sites. We employ simple statistical comparisons between proxy reconstructions to evaluate their correlations over time and, ultimately, their utility as proxies for regional climate. Proxies examined include oxygen isotopic composition of benthic and planktonic foraminifera, abundance of the sea‐ice biomarker IP₂₅, allochthonous quartz in marine sediments (a proxy for drift ice around Iceland), marine carbonate abundance, total organic carbon concentration, chironomid assemblages, lacustrine biogenic silica and carbon/nitrogen ratios in lake sediments. Most of the examined proxy records, including temperature and sea‐ice proxies, correlate strongly with each other over multi‐centennial timescales, and thus do appear to record changes in regional climate. Copyright © 2011 John Wiley & Sons, Ltd.     

Defining the distribution of arsenic species and plant nutrients in rice (Oryza sativa L.) from the root to the grain

The transport mechanisms of As from contaminated soil or irrigation water into roots and subsequently into grain, and the As species distribution—a toxicity determinant, is critical for assessing health risks imposed by As. However, the commonly-employed extraction of plant material with trifluoroacetic acid (TFA) has not proven successful in preserving inorganic As species. Synchrotron-based spectroscopic techniques are useful for discerning elemental distributions and chemical speciation of elements in situ. Here, we both characterize the mineral phases of Fe coatings on rice roots, and quantify plant nutrients and As species in situ on roots and grain samples. Arsenic in rice grains was present in bran layers as oxidized As (69-88% as As(V)_i and 12-31% as DMA) and in the germ as a mixture of As(V)_i and As(III)_i, but was non-detected from the endosperm, which is consistent with previous findings. The extent of Fe coatings on rice roots was variable and, when present, consisted of lepidocrocite (γ-FeOOH), goethite (α-FeOOH) and ferrihydrite (Fe(OH)₃·nH₂O). Arsenic was co-located with root Fe coatings, but our findings indicate that Fe is not a direct interceptor of As uptake, and is rather a bulk scavenger mostly near the air-water interface. On whole root mounts with Fe plaque, arsenic was present as mixed species of As(V)_i (44-66%) and As(III)_i (34-56%). Within a root cross-section, oxidized As species were dominant in the xylem (86% as As(V)_i and 14% as DMA) whereas mostly reduced species (71% as As(III)_i, 29% as AsGlu₃) resided within a vacuole adjacent to the xylem. This finding contrasts the prevailing view that As(V)_i is rapidly reduced in roots and transported to shoots as As(III)_i, and points to the importance of interspecies differences in As-uptake dynamics.     

Wetland Loss Patterns and Inundation-Productivity Relationships Prognosticate Widespread Salt Marsh Loss for Southern New England

Tidal salt marsh is a key defense against, yet is especially vulnerable to, the effects of accelerated sea level rise. To determine whether salt marshes in southern New England will be stable given increasing inundation over the coming decades, we examined current loss patterns, inundation-productivity feedbacks, and sustaining processes. A multi-decadal analysis of salt marsh aerial extent using historic imagery and maps revealed that salt marsh vegetation loss is both widespread and accelerating, with vegetation loss rates over the past four decades summing to 17.3 %. Landward retreat of the marsh edge, widening and headward expansion of tidal channel networks, loss of marsh islands, and the development and enlargement of interior depressions found on the marsh platform contributed to vegetation loss. Inundation due to sea level rise is strongly suggested as a primary driver: vegetation loss rates were significantly negatively correlated with marsh elevation (r ²?=?0.96; p?=?0.0038), with marshes situated below mean high water (MHW) experiencing greater declines than marshes sitting well above MHW. Growth experiments with Spartina alterniflora, the Atlantic salt marsh ecosystem dominant, across a range of elevations and inundation regimes further established that greater inundation decreases belowground biomass production of S. alterniflora and, thus, negatively impacts organic matter accumulation. These results suggest that southern New England salt marshes are already experiencing deterioration and fragmentation in response to sea level rise and may not be stable as tidal flooding increases in the future.     

The history and dynamics of a welded pyroclastic dam and its failure

Igneous intrusions in coal seams are found in 80 % of coal mines in the Huaibei coalfield, China, and coal and gas outburst accidents have occurred 11 times under a 120-m-thick sill in the Haizi mining field. The magma’s heat had a significant controlling effect on coal seam gas occurrence. Based on theoretical analysis, experimental tests and site validation, we analyzed the temperature distribution following magma intrusion into coal measure strata and the variations in multiple physical parameters and adsorption/desorption characteristics between the underlying coal seams beneath the sill in the Haizi mining field and coal seams uninfluenced by magma intrusion in the adjacent Linhuan mining field. The research results show that the main factors controlling the temperature distribution of the magma and surrounding rocks in the cooling process include the cooling time and the thickness and initial temperature of the magmatic rock. As the distance from sill increases, the critical effective temperature and the duration of sustained high temperatures decrease. The sill in the Haizi mining field significantly promoted coal seam secondary hydrocarbon generation in the thermally affected area, which generated approximately 340 m³/t of hydrocarbon. In the magma-affected area, the metamorphic grade, micropore volume, amount of gas adsorption, initial speed of gas desorption, and amount of desorption all increase. Fluid entrapment by sills usually causes the gas pressure and gas content of the underlying coal seams to increase. As a result, the outburst risks from coal seams increases as well.     

‘Snake River (SR)-type’ volcanism at the Yellowstone hotspot track: distinctive products from unusual,high-temperature silicic super-eruptions

A new category of large-scale volcanism, here termed Snake River (SR)-type volcanism, is defined with reference to a distinctive volcanic facies association displayed by Miocene rocks in the central Snake River Plain area of southern Idaho and northern Nevada, USA. The facies association contrasts with those typical of silicic volcanism elsewhere and records unusual, voluminous and particularly environmentally devastating styles of eruption that remain poorly understood. It includes: (1) large-volume, lithic-poor rhyolitic ignimbrites with scarce pumice lapilli; (2) extensive, parallel-laminated, medium to coarse-grained ashfall deposits with large cuspate shards, crystals and a paucity of pumice lapilli; many are fused to black vitrophyre; (3) unusually extensive, large-volume rhyolite lavas; (4) unusually intense welding, rheomorphism, and widespread development of lava-like facies in the ignimbrites; (5) extensive, fines-rich ash deposits with abundant ash aggregates (pellets and accretionary lapilli); (6) the ashfall layers and ignimbrites contain abundant clasts of dense obsidian and vitrophyre; (7) a bimodal association between the rhyolitic rocks and numerous, coalescing low-profile basalt lava shields; and (8) widespread evidence of emplacement in lacustrine-alluvial environments, as revealed by intercalated lake sediments, ignimbrite peperites, rhyolitic and basaltic hyaloclastites, basalt pillow-lava deltas, rhyolitic and basaltic phreatomagmatic tuffs, alluvial sands and palaeosols. Many rhyolitic eruptions were high mass-flux, large volume and explosive (VEI 6–8), and involved H₂O-poor, low-δ¹⁸O, metaluminous rhyolite magmas with unusually low viscosities, partly due to high magmatic temperatures (900–1,050°C). SR-type volcanism contrasts with silicic volcanism at many other volcanic fields, where the fall deposits are typically Plinian with pumice lapilli, the ignimbrites are low to medium grade (non-welded to eutaxitic) with abundant pumice lapilli or fiamme, and the rhyolite extrusions are small volume silicic domes and coulées. SR-type volcanism seems to have occurred at numerous times in Earth history, because elements of the facies association occur within some other volcanic fields, including Trans-Pecos Texas, Etendeka-Paraná, Lebombo, the English Lake District, the Proterozoic Keewanawan volcanics of Minnesota and the Yardea Dacite of Australia. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. This paper constitutes part of a special issue dedicated to Bill Bonnichsen on the petrogenesis and volcanology of anorogenic rhyolites.